Gear Iconx Couldnt Pair Check Settings for This Device and Try Again
Connect your Gear IconX to a phone or tablet
Some things are just improve paired together, and that goes double for your earbuds and telephone. Connect your Gear IconX with your phone or additional Bluetooth devices like tablets, computers, TVs, and iOS devices so you tin stream music. With the Galaxy Vesture app on your telephone or tablet, you can control the earbuds, adjust sure settings, and more than.
The Gear IconX earbuds are uniform with devices running Android Os iv.4 or afterwards with at least 1.5 GB of RAM or more.
You'll get the best experience when using the Galaxy Wear app. It'south compatible with phones and tablets running Android five.0 and higher, and on devices running iOS 10 or higher. Some features won't appear in the app unless you've already connected the earbuds at to the lowest degree once.
-
Other Android phones and tablets: You tin can stream music, make calls, turn on Ambient sound, and use touchpad controls.
-
iOS phones and tablets: Y'all tin stream music, make calls, and use touchpad controls.
Yous can also utilise boosted features like Auto workout tracking, fettle coaching, and music transfer. Samsung Health 5.0 or later is required for Machine workout tracking. Samsung Health is non uniform with tablets.
Pairing your earbuds to your phone or tablet is practically effortless. You just demand the Galaxy Habiliment app installed on your phone or tablet.
-
Open up the Galaxy Wearable app, and then tap Get started.
-
Place your earbuds in the charging case, and and then printing thePair button on the back of the example for approximately 3-five seconds. The charging case indicator will flash red, light-green, and and so blue when it enters pairing way.
-
Next, select Gear IconX from the list of devices in the Galaxy Wearable app. And then, review and accept the dissimilar permissions.
-
When your device is spotted, select it; pairing and setup will brainstorm.
-
Allow the boosted permissions. Review the information, and tap Concord to all, and then tap NEXT.
-
Select your desired settings for the earbuds, and then tap FINISH.
If you want to disconnect the earbuds from your phone or tablet manually, open the Galaxy Vesture app, tap More than options (the three vertical dots), and then select Disconnect. Tap Disconnect once again to ostend.
Note: Some devices, especially those that are not tested or canonical by the Bluetooth SIG, may be incompatible with the earbuds.
Got an iPhone, some other Android, a computer, watch, or whatever device that doesn't back up the Milky way Article of clothing app? No worries, you can use earbuds just like other Bluetooth headphones.
Pair Gear IconX (2018)Place the earbuds in the charging example, shut the hat, and then press the Pair button on the back of the case for approximately 3-5 seconds. The charging instance indicator will flash cherry, light-green, and then blue while in pairing style. Navigate to the Bluetooth settings on your device and select Gear IconX from the list of available devices.
Pair Gear IconX (2017)Place the earbuds in the charging case and shut the lid for 5 to 6 seconds. Remove the earbuds from the instance and insert both earbuds into your ears. The earbuds volition automatically plough on and enter Bluetooth pairing mode. Next, navigate to Bluetooth settings on your device, and select Gear IconX from the list of available devices.
When your Gear IconX are paired with ane device just y'all want to connect them to another, a reset is not required. Just insert the earbuds in the charging case and close the lid. Then, identify the earbuds into pairing manner using the steps specific to your model:
-
Gear IconX 2018: Press thePair button on the back of the instance for approximately 3-five seconds. In one case in pairing mode, the charging case indicator will flash red, dark-green, and then blue.
-
Gear IconX 2017: You can enter pairing way by simply removing the earbuds from the case and inserting both earbuds into your ears.
Once the earbuds are in pairing mode, connect them to the other device via the Galaxy Wearable app or the Bluetooth settings. If the Galaxy Vesture app is currently connected to a device, tap More than options (the iii horizontal lines), and and so tap Connect new Gear.
Note: When your earbuds are continued to a device with a Samsung account, the Bluetooth information will be synced to your other Samsung devices automatically.
If y'all paired the earbuds to ii different phones or tablets using Milky way Wearable, yous can switch between them easily.
-
Open the Galaxy Article of clothing app on the telephone or tablet that is not connected to the earbuds.
-
The earbuds should automatically connect to the phone or tablet. If Galaxy Wear is already open, yous may simply tap CONNECT.
-
When you're ready to switch back to the first device, open the Bluetooth settings menu on the second device, and then tap the earbuds.
-
To reconnect with the beginning device, open the Bluetooth settings on the get-go device and tap the earbuds.
Additionally, if you have multiple Bluetooth audio devices continued, you tin can use the Media and Device panel on Android 10 phones to switch connections between the unlike devices.
Thank y'all for your feedback!
© 2022 Samsung Electronics America, Inc. Samsung, Samsung Galaxy and Family Hub are trademarks of Samsung Electronics Co., Ltd. All other brands, products and services, and their corresponding trademarks, names and logos, are the property of their respective owners. The above content is provided for entertainment and information purposes only. Consult user manual for more complete data. All information included herein is field of study to change without detect. Samsung is not responsible for any direct or indirect damages, arising from or related to use or reliance of the content herein.
Source: https://www.samsung.com/us/support/answer/ANS00078134/